HP 3C509B-TP Manual de usuario descargar pdf (Pagina 10)

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

6 Remove the 3COM cards driver diskette and insert Netware client for DOS

and MS-Windows disk 1.

If you are using a Vectra VL8, go straight to step 7.

If you are using a VL7 or VE7/VE8, finish the installation by using the

instructions below.

a Execute INSTSTALL.EXE.

b Specify the settings as listed below:

• C:\NWCLIENT

•Yes

• C:\WINDOWS

•No

• 3Com Fast Etherlink/Etherlink III Bus Master for VE7/VE8, (or

3COM Etherlink III Parallel Tasking Family for VL7, then highlight

option 6 and then go to step e below).

c Under the heading "Select the driver for your network board", insert

the 3Com 3C590 drivers disk and set the path to "A:\NETWARE\

CLIENT." (If you have an HP preloaded HDD, set path to "C:\

Masters\LanDrv\3C509\NWCLIENT\)

d Press "Enter" to continue the installation.

e When prompted, insert the corresponding disks to complete file

transfer and driver installation.

f When the install utility is finished, press <CRTL><ALT><DEL> to

restart the machine.

g After Windows loads, open the "NETWORK" folder, double-click the

"NETWORK SETUP" icon.

h Select "Networks", and verify that "Novell Netware (Workstation Shell

4.0 and above)" is listed under "Install Windows support for the follow-

ing network only:" and click on "OK."

7 Execute INST_DOS.EXE and enter yes to accept the agreement.

8 Accept the default products by pressing enter, and then press “F10” to

continue.

9 Select 16-bit LAN Drivers and hit the enter key.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Sin comentarios

HP 3C509B-TP Manual de usuario Pagina 10