HP 3C509B-TP Manual de usuario descargar pdf (Pagina 13)

2 Connecting to a Netware 4.11 Server

Windows 95 SR2

Windows 95 SR2 Requirements

• HP Vectra with Windows 95 SR2 installed.

• 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.

Vectra VL8 and VE7/VE8 Driver Name : W95EL5X9.INF Size: 16KB

Date: 6/11/97

• Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96

• Windows 95 SR2 media.

• Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX,

and NWLink NetBIOS transfer protocols.

Device Configuration

• Boot PROM Disabled

• Transceiver Type Auto Select

• Network Driver Optimization Windows or OS/2 Client

• Maximum Modem Speed 9600 Bps

• Plug and Play Compatibility Disabled

• Full Duplex Disabled

Procedure

1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B

adapter card into an ISA slot.

2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.

3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s

website) and execute 3C5X9CFG.EXE.

4 Select “CONFIGURE NIC,” and verify the resource settings listed above

under the heading “Device Configuration.”

5 If changes are required, save those changes and exit.

Vectra VL8 Vectra VL7 Vectra VE7/VE8

I/O Base Address 210 210 300

Interrupt Request

Level

10 10 10

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Sin comentarios

HP 3C509B-TP Manual de usuario Pagina 13