HP 6000 Router Series Manual de instalación Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
54 CHAPTER 6: TROUBLESHOOTING
Terminal emulation: VT100
If the parameter settings do not match the above values, please modify the
configuration.
Troubleshooting
Application Software
Upgrade
Fault 1 Start the Router, upgrade the software with the TFTP approach, and the system
displays the following prompt:
DownLoad Program To Flash Through Net Port
boot device : ErrDev
unit number : 0
processor number : 0
file name : 6000.bin
inet on ethernet (e) : 1.1.1.1
host inet (h) : 1.1.1.2
user (u) : user
ftp password (pw) : password
flags (f) : 0x80
Loading... Loading Failed
Troubleshooting
The fault occurs due to the wrong boot device 'ErrDev' using a wrong application.
To solve the problem, just change “ErrDev” to “wancom” which is the application
upgrade device of 6000 Router.
Fault 2 Start the Router, upgrade the application software with the TFTP approach, and
the following information is displayed:
DownLoad Program To Flash Through Net Port
boot device : wancom
unit number : 0
processor number : 0
file name : 6000.bin
inet on ethernet (e) : 1.1.1.1
host inet (h) : 1.1.1.2
user (u) : user
ftp password (pw) : password
flags (f) : 0x80
Attached TCP/IP interface to wancom0.
Subnet Mask: 0xffffffc0
Attaching network interface lo0... done.
Loading... Error code 2: Access violation
tftpGet: Error occurred while transferring the file.
A bad file or twisted pair doesn't link correctly!Loading Failed
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 81 82

Comentarios a estos manuales

Sin comentarios