HP 706C Manual de usuario descargar pdf (Pagina 98)

(

By responding to the Enter request: message at the end of the main

configuration menu with "A" for models 710E and 710F or "9" for

model 710C (Set Unit I.D. Number), you may set the Unit ID number

which is used to determine which unit in the cascaded chain a print

job will be sent to.

NOTE:

Units do not need to be numbered in numerical sequence.

For example, if three Print Master units are being cascaded, they can

be identified as Units 1, 2, 3 or Units 4, 6, 8, Units 1, 6, 9, etc..

However, two units cannot be configured with the same Unit ID

Number.

Print Master will respond with:

Unit Identification Number is..................1

Enter new Unit Number (1 to 9)................:

Enter the desired Unit ID Number. Print Master will save the Unit ID

Number permanently in non-volatile memory and return to the main

configuration menu (see

Appendix B.1.3

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 122 123

Sin comentarios

HP 706C Manual de usuario Pagina 98