HP AB232A Guía de instalación descargar pdf (Pagina 20)

Installation

20 FCA2384 PCI-X Host Bus Adapter for OpenVMS and Tru64 UNIX Installation Guide

Prerequisites

The following prerequisites are provided to help you install the FCA2384 HBA.

Hardware Requirements

Table 3 describes the voltage and minimum PCI slot requirements for the

FCA2384.

In addition, you must use Multimode fiber optic cable with LC connector, used

with short-wave lasers.

Set Jumpers

Table 4 lists the FCA2384 jumper settings. The HBA has two jumper blocks (JX1,

JX2) that control the host adapter's device ID. The default device ID is F980.

Table 3: HBA Voltage and Minimum PCI Slot Requirements

HBA Voltage

Requirement

HBA PCI Signaling

Voltage

PCI Slot Type

3.3 VDC 3.3 volt, 5 volt Tolerant Universal PCI connector

Table 4: Jumper Settings

Device ID Jumper Setting

F980 JX1:1-2, JX2:2-3

1AE5 JX1:2-3, JX2:2-3

F981 JX1:2-3, JX2:1-2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Sin comentarios

HP AB232A Guía de instalación Pagina 20