HP AdvanceStack Internet Router Manual de instalación descargar pdf (Pagina 27)

2-11

Installing the HP AdvanceStack Internet Router

Connecting to the Network

Installation

2. Use a straight-through RJ-45-to-RJ45 cable to connect the ISDN BRI port

(RJ-45) to an NT1 device.

Figure 2-2. Connecting the ISDN BRI Port to an NT1 Device

Connecting the Console Terminal and Modem

Use a console terminal for local administrative access to the router. You can

connect only a terminal to the console port. Use the auxiliary port with a

terminal or a modem for remote access to the router.

Connecting to the Console Port

Take the following steps to connect a terminal (an ASCII terminal or a PC

running terminal emulation software) to the console port on the router.

1. Use an RJ-45 roll-over cable and an RJ-45-to-DB-25 or RJ-45-to-DB-9

adapter to connect a console terminal to the console port. The adapters

provided by HP are labeled “Terminal”.

Additional information on roll-over cable pinouts is provided in the

appendix A “Cable Specifications”.

J3138.bk Page 11 Wednesday, March 18, 1998 6:07 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 105 106

Sin comentarios

HP AdvanceStack Internet Router Manual de instalación Pagina 27