HP EML Base Library Guía de inicio rápido descargar pdf (Pagina 11)

The library ships with a null password. Passwords must be set to ex-

actly eight characters consisting of the numbers 0 through 9 and the

period character.

• Configuration > Library Configuration > Configure

Load Ports

This command shows the number of installed load ports and enables

you to toggle between using each for import/export or for storage.

Configure it as a load port to move tapes in and out of the library.

Configure it as slots to increase the number of storage slots in the

library. Changing a load port configuration will cause a library re-

boot.

• Configuration > Library Configuration > Change

Network Settings

This configures the network settings for the Interface Manager card,

which can be set automatically using DHCP (the default) or manually

using a static IP address. Use the Address Config: button to toggle

between these two options. If you are setting the network addresses

manually, set each address element separately.

• Configuration > Library Configuration > Configure

Barcode Reporting Formats

This command defines how bar codes are displayed on the OCP

and sent to the host. Bar code reporting can be configured as six to

eight characters and left or right aligned. If you choose six characters

with left alignment, any characters after the six are truncated. If you

choose six characters and right alignment, only the last six characters

are shown with the beginning characters truncated.

• Configuration > Library Configuration > Configure

Reserve Slots

Up to nine slots can be reserved for special purposes, such as

cleaning tapes. The default is none. Select the number you want to

reserve and press Save.

• Configuration > Library Configuration > Configure

Inventory Mode

This command allows you to require bar codes on tape cartridges,

or to make them optional. Requiring bar codes significantly shortens

inventory time.

Identifying the parts of the library

2. 8U base module

1. Customer reserved space. If

your library contains LTO4 or

LTO5 tape drives, this space con-

tains the switch for the internal

network.

4. Robotics unit3. 4U base module

6. Operator control panel (OCP)5. Viewing windows

8. 4U blank cover7. 5-Cartridge load port

2. Switch for internal network (in

libraries with LTO4 or LTO5 tape

drives only)

1. Customer reserved space

4. 4U base module3. 8U base module

6. Base module card cage (your

card cage might look different)

5. Main power switch

8. Cable management features7. Tape drives

10. Power supplies9. Fans

12. Power distribution unit (PDU)11. Power strip

Getting help

• HP product information

http://www.hp.com/go/storage

• HP technical support and phone numbers:

http://www.hp.com/support

• HP manuals:

http://www.hp.com/support/manuals

• HP StorageWorks Library and Tape Tools (L&TT) diagnostic software:

http://www.hp.com/support/tapetools

• Interface Manager and HP StorageWorks Command View TL:

http://www.hp.com/support/cvtl

Page 11

1 2 ... 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

HP EML Base Library Guía de inicio rápido Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP EML Base Library