HP Fiber-Optic Hub Plus Guía de usuario descargar pdf (Pagina 18)

1. Make sure the hub’s power cord is correct for your country’s ac power supply. Do not

plug the power cord into the power supply until the hub is mounted. (Note that the hub

does not have a power switch; the hub is powered on when the power cord is plugged

in.)

2. As described on the next page, mount the hub in a rack or on a wall by using the

mounting brackets, or place it on a table.

Before mounting the hub, plan its location and orientation relative to other devices and

equipment. Also consider management of the cabling you will be attaching and consider access

to the ports you will be using. In the example below, the hub is mounted in a rack with other

HP EtherTwist family devices and a cable guide unit. Order the HP EtherTwist LAN Rack (HP

46298D) and the Cable Guide (HP 35199D). If you are using a modular adapter on an

EtherTwist hub, position that hub at least one rack unit apart from any HP Fiber-Optic Hub Plus

for easier port access.

1. Mount the hub

Thin coaxial cable

backbone

Cable guide

Standard 19-inch

telco rack

HP network

devices; hubs,

bridges, etc.

2-2 Installation

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Sin comentarios

HP Fiber-Optic Hub Plus Guía de usuario Pagina 18