HP Jetdirect 175x Manual de usuario descargar pdf (Pagina 36)

TFTP configuration file
To provide additional configuration parameters for your HP Jetdirect print server, such as SNMP (Simple Network
Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This
TFTP configuration file’s relative path name is specified in the BOOTP reply using the vendor-specific tag “T144” or
the standard BOOTP tag “ef” in the /etc/bootptab file.
Example of a TFTP configuration file. Lines starting with “#” are remarks not included in the file.
#
# Example of an HP Jetdirect TFTP Configuration File
#
# Allow only Subnet 192.168.10 access to peripheral.
# Up to 10 "allow" entries can be written via TFTP.
# Up to 10 "allow" entries can be written via Telnet or embedded web server.
# "allow" may include single IP addresses.
#
allow: 192.168.10.0  255.255.255.0
#
#
# Disable Telnet.
#
telnet: 0
#
#
# Enable the embedded web server.
#
ews-config: 1
#
#
# Detect SNMP unauthorized usage.
#
authentication-trap: on
#
#
# Send Traps to 192.168.10.1.
#
trap-dest: 192.168.10.1
#
#
# Specify the Set Community Name.
#
set-community-name: 1homer2
#
# End of file
TFTP configuration file parameters
The following types of TFTP parameters are listed and described in tables below. You can click on a category below, to
jump to the list.
General parameters●   
TCP/IP: main parameters●   
TCP/IP: print option parameters●   
TCP/IP: raw print port parameters●   
TCP/IP: access control parameters●   
TCP/IP: other parameters●   
SNMP parameters●   
IPX/SPX parameters●   
AppleTalk parameters●   
DLC/LLC parameters●   

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 201 202

Comentarios a estos manuales

Sin comentarios

HP Jetdirect 175x Manual de usuario Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP Jetdirect 175x