HP Kayak XW U3-W3 Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 7
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
BIOS beep codes list for desktops
Copyright ©2003 CNET Networks, Inc. All rights reserved.
To see more downloads and get your free TechRepublic membership, please visit
http://techrepublic.com.com/2001-6240-0.html
.
Award BIOS beep codes
http://www.phoenix.com/en/customer+services/bios/awardbios/default1.htm
Number of
beeps
Problem description Troubleshooting recommendation
1 long & 2 short Video error Check the video card.
Any other beeps RAM problem Reseat the RAM or replace with known good
chips.
PhoenixBIOS beep codes
http://www.phoenix.com/en/customer+services/bios/phoenixbios/default1.htm
Unfortunately, PhoenixBIOS beep codes are significantly more complicated than other BIOS
manufacturers. Instead of a single beep code set, PhoenixBIOS codes consist of a series of beep code
sets separated by a short pause. Older Phoenix BIOS Plus and PhoenixBIOS 1.x systems used a series
of three sets, while the PhoenixBIOS 4.x systems use a series of four sets. The codes listed below are
only some of the more than 100 codes for the PhoenixBIOS 4.x. For a complete list of Phoenix BIOS
POST task routines and beep codes, please visit their Web site or review your motherboard's
documentation.
Number of
beeps
POST routine description/problem Troubleshooting recommendation
1 One short beep before boot Normal operation
1-1-1-3 Verify real mode
A problem exists with the CPU and/or
motherboard. Check and replace if
necessary.
1-1-2-1 Get CPU type
A problem exists with the CPU and/or
motherboard. Check and replace if
necessary.
1-1-2-3 Initialize system hardware
A problem exists with the motherboard.
Check and replace if necessary.
1-1-3-1
Initialize chipset with initial POST
values
A problem exists with the motherboard.
Check and replace if necessary.
1-1-3-2 Set IN POST flag
A problem exists with the motherboard.
Check and replace if necessary.
1-1-3-3 Initialize CPU registers
A problem exists with the CPU and/or
motherboard. Check and replace if
necessary.
1-1-4-3 Initialize I/O component
A problem exists with the I/O port hardware
or a device connected to an I/O port. It could
also be an expansion device in the PC or the
motherboard.
Vista de pagina 1
1 2 3 4 5 6 7

Comentarios a estos manuales

Sin comentarios