HP NetServer LH 3000 Guía de instalación descargar pdf (Pagina 22)

Chapter 2 Installation

Step 7: Connect Power Harness

1. Orient the connector labeled P2 on the power harness to the power socket

on the backplane of the mass storage cage, as shown in Figure 2-9.

Figure 2-9. Connect Power Harness to Backplane of Mass Storage Cage

2. Connect the P2 connector on the power harness to the power socket on the

backplane of the mass storage cage. Verify that the latch on the connector

is seated.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Sin comentarios

HP NetServer LH 3000 Guía de instalación Pagina 22