HP Omni 220-1155xt CTO Desktop PC Manual de usuario descargar pdf (Pagina 14)

3. After the system has completely shut down, disconnect the power adapter from the back of the

computer.

4. Disconnect all other attached cables from the back and side of the computer.

5. Carefully remove the computer from the wall and place facedown on a stable flat surface

covered with a clean soft cloth.

CAUTION: The computer is heavy and may require two people to remove it from the wall.

6. Following the manufacturer's instructions, remove the wall-mounting hardware from the VESA

adapter plate on the computer.

Replacing the computer stand

Perform the following steps to replace the computer stand on your computer.

1. Loosen the two screws at the bottom that secure the back cover to the computer. Keep turning

the screwdriver until you hear five clicks. This indicates that the screw is sufficiently loosened. If

present, loosen the screw (1) at the center of the back cover.

10 Chapter 2 Reinstalling the stand on your HP computer

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

HP Omni 220-1155xt CTO Desktop PC Manual de usuario Pagina 14