HP ProLiant BL495c - G5 Server Especificaciones

HP ProLiant BL495c Generation 5 Server Blade Maintenance and Service Guide Part Number 491031-004 April 2009 (Fourth Edition)

periode, gewoonlijk vijf (5) werkdagen, retourneren aan HP. Het defecte onderdeel moet met de bijbehorende documentatie worden geretourneerd in het m

Serviço de garantia apenas para peças A garantia limitada da HP pode incluir um serviço de garantia apenas para peças. Segundo os termos do serviço d

Customer self repair 12

Customer self repair 13

Customer self repair 14

Customer self repair 15

Illustrated parts catalog Server blade components Item Description Spare part number Customer self repair (on page 5) 1 Access panel 490819-00

Item Description Spare part number Customer self repair (on page 5) f) 2.4-GHz AMD Opteron™ Model 2378* ** 500514-001 Optional2 g) 2.3-GHz AMD Op

Item Description Spare part number Customer self repair (on page 5) j) QLogic QMH4062 1GbE iSCSI BL-c Adapter 488081-001 Mandatory110 Hardware

2Optional: Optional—Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für Customer Self Repair ausgelegt. Wenn Si

© Copyright 2008, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warran

Illustrated parts catalog 20

Removal and replacement procedures Required tools You need the following items for some procedures: • T-15 Torx screwdriver (provided inside the acc

CAUTION: When performing non-hot-plug operations, you must power down the server blade and/or the system. However, it may be necessary to leave the

Power down the server blade Before powering down the server blade for any upgrade or maintenance procedures, perform a backup of critical server data

3. Remove the server blade. 4. Place the server blade on a flat, level work surface. WARNING: To reduce the risk of personal injury from hot su

5. Disconnect the hard drive cables. 6. Remove the hard drive. 7. Disconnect the hard drive cables from the hard drive. Retain for future use. To

4. Disconnect the hard drive cables. 5. Remove the hard drive ("Hard drive" on page 24). 6. Remove the DIMM baffle. To replace the comp

For this procedure, removing the hard drive from the DIMM baffle is not required. 6. Remove the DIMM. To replace the component, reverse the removal

To replace the component: 1. Install the mezzanine card. Press down above the back side of the connector to seat the card. 2. Install the access p

To replace the component, reverse the removal procedure. Server blade handle To remove the component: 1. Power down the server blade (on page 23).

Contents Customer self repair... 5

6. Remove the release button. To replace the component, reverse the removal procedure. Heatsink WARNING: To reduce the risk of personal injury

To replace the component: 1. Clean the old thermal grease from the processor with the alcohol swab. Allow the alcohol to evaporate before continuing

4. Install the heatsink. Insert both screws, and then alternate tightening until the heatsink is seated properly. 5. Install the access panel (&quo

5. Open the processor retaining latch and the processor socket retaining bracket. 6. Using your fingers, remove the failed processor. To replace t

1. If the processor has separated from the installation tool, carefully re-insert the processor in the tool. 2. Align the processor installation to

3. Press down firmly until the processor installation tool clicks and separates from the processor, and then remove the processor installation tool.

CAUTION: To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink screws. Use the wrench supplied wi

2. Remove the server blade (on page 23). 3. Remove the access panel ("Access panel" on page 24). 4. Remove the battery tray. To replace

11. Open the processor retaining latch and the processor socket retaining bracket. 12. Using your fingers, remove the processor from the failed sys

13. Remove the system board assembly. To replace the system board: 1. Install the spare system board assembly. 2. Prepare the processor socket on

External USB functionality... 49Componen

a. Remove the processor socket protective cover. b. Open the processor retaining latch and the processor socket retaining bracket. 3. Install the

5. Close the processor retaining latch and the processor socket retaining bracket. 6. Clean the old thermal grease from the heatsink and the to

8. Install the heatsink ("Heatsink" on page 30). 9. Install all components removed from the failed system board. IMPORTANT: Instal

WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack. A risk of fire and burns e

Cabling Hard drive cabling CAUTION: When routing cables, always be sure that the cables are not in a position where they can be pinched or crimpe

Numerous configurations are possible. This section offers two possible configurations. For more information, see "USB support and functionality

1. Connect the SUV cable to the server blade. 2. Connect the video connector to a monitor. 3. Connect a USB hub to one USB connector. 4. Connect t

Diagnostic tools Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common problems and compre

This functionality supports operating systems that may not be supported by the server blade. For operating systems supported by the server blade, see

Redundant ROM support The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server has a 4-MB ROM that acts a

Customer self repair HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow for greater flexibility in

Component identification Front panel components Item Description 1 Local I/O connector 2 Serial label pull tab 3 Server blade handle button 4

Front panel LEDs Item Description Status 1 UID LED Blue = Identified Blue flashing = Active remote management Off = No active remote management

System board components Item Description 1 DIMM slots 2 Hard drive data connector 2 3 Hard drive data connector 1 4 Hard drive power connect

System maintenance switch Position Function Default 1* iLO 2 security override Off 2 Configuration lock Off 3 Reserved Off 4 Reserved Off 5* P

Accessing the redundant ROM If the system ROM is corrupted, the system automatically switches to the redundant ROM in most cases. If the system does

Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) Shipping -40°C to 60°C (-4

Acronyms and abbreviations CSR Customer Self Repair HP SIM HP Systems Insight Manager iLO 2 Integrated Lights-Out 2 IML Integrated Management Log

WEBES Web-Based Enterprise Service Acronyms and abbreviations 57

Index Aaccess panel 24 Array Diagnostic Utility (ADU) 48 Bbaffles 25 battery 16, 42 buttons 50 Ccables 44 cabling 44 cautions 21 c

system battery 42 system board 37 system components 21, 50 system maintenance switch 52, 53 Ttools 21, 47 Torx screwdriver 21 troublesho

• Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP de remplacer ces pièces, les coûts de dépl

NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la garanzia, HP richiede che queste parti sia

anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-Ersatzteil geliefert werden, können Sie entnehme

Centro de asistencia técnica de HP y recibirá ayuda telefónica por parte de un técnico. Con el envío de materiales para la sustitución de componentes