HP StorageWorks 20 - Modular Smart Array Especificaciones descargar pdf (Pagina 22)

Removing and Replacing Components

2. Rotate the slot in the enclosure lid lever to the unlocked position (1), as indicated by the

open padlock embossed in the lever.

3. Pull the lever toward the front of the enclosure (2).

4. Lift the lid off the enclosure (3).

To replace the lid:

1. Position the lid on the chassis so that the peg on the chassis (1) fits into the hole under the

lid lever, and the flanged pegs (2) on the inner edge of the lid fit into slots (3) on the side

of the enclosure.

2. Press the lid lever fully down.

3. Rotate the slot in the lid lever to the locked position.

Midplane Board

1. Remove the fan assemblies.

2. Remove the power supply units.

3. Remove the controller module.

HP StorageWorks Modular Smart Array 20 Maintenance and Service Guide 3-7

1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

HP StorageWorks 20 - Modular Smart Array Especificaciones Pagina 22