HP T1000 Guía de usuario descargar pdf (Pagina 7)

Component identification 7

UPS front panel controls and LED indicators

Item Description Function

Power On/Standby

button

Turns the UPS power on and off, and places the UPS in Standby mode.

2 Output Load Level LED

Shows approximately how much of the UPS power capacity is used to

support the equipment connected to the output receptacles.

Red—Maximum load

Amber—Medium load

Green—Light load

3 Power LED

Green—The UPS is on and supplying connected equipment with AC

power.

Flashing green—The UPS is operating from its internal batteries during a

blackout or severe brownout. If the blackout or brownout is prolonged,

save any open files and shut down the connected equipment.

4 Voltage Correction LED

Green—The UPS is automatically correcting high or low AC voltage on

the utility line without the assistance of battery power. The UPS will emit a

slight clicking noise.

5 Battery Warning LED

Amber—During a self-test, the UPS found that the batteries must be

recharged. Charge the batteries and repeat the self-test ("Initiating a self-

test" on page 19).

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Sin comentarios

HP T1000 Guía de usuario Pagina 7