HP zx6000 Guía de instalación Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Setting Up and Using Your System
System Description
Chapter 1 15
Features
The following table provides an overview of the zx6000 and rx2600
system features:
Feature Description
Processor(s)
Systems can be operated with one or two Intel
®
Itanium
®
2 processors
CacheMemory(integrated
in processor package)
Level 0: 16KB
Level 1: 256KB
Level 2: 3MB (1.5 MB for 900MHz processor)
Internal Processor Clock
Speed
900MHz and 1GHz
Chipset HP scalable processor, including a Processor Dependent Hardware
interface, AGP/PCI X host controller and Memory Controller
Firmware 8Mb flash EEPROM, write-protected by BMC
Operating System HP-UX and Linux Operating Systems
Main Memory Twelve DIMM sockets that support 256MB, 512MB and 1GB DDR
SDRAM memory modules.
The order in which you install the memory modules is important. For
information on installing memory, see the zx6000/rx2600 Operation &
Maintenance Guide (at www.hp.com/go/bizsupport). You can install a
minimum of 512MB (1 Gb for server configuration) of memory and a
maximum of 12GB.
Mass Storage Four shelves, supporting:
One front-access, slimline, optical drive.
Three fast access internal 3 1/2-inch hard disk drives (1-inch
height).
SCSI Controller Two channel Ultra 160 SCSI PCI bus.
IDE Controller Includes an integrated Ultra ATA-100 capable controller that supports
one IDE device.
Graphics Controllers
NVIDIA Quadro2 EX, NVIDIA Quadro4 900XGL
or
ATI Radeon 7000, ATI FireGL 8800 and ATI FireGL4
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Comentarios a estos manuales

Sin comentarios