HP XM600 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 41
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Installing and Replacing Hardware Parts in Your PC Workstation
Removing and Replacing the Airflow Guide
5
Removing and Replacing the Airflow Guide
Removing the HP
UltraFlow Airflow
Guide
1 Switch off the display and PC Workstation. Disconnect all power cables
and any LAN or telecommunications cables.
2 Remove the PC Workstation’s cover (refer to page 3).
3 Grasp the handle on top of the HP UltraFlow Airflow Guide, then slide it
out of the PC Workstation.
4 Lift the HP UltraFlow Airflow Guide upwards to remove it from the PC
Workstation’s case.
Replacing the HP
UltraFlow Airflow
Guide
1 Slide the HP UltraFlow Airflow Guide onto the processor fan housing
until it clicks into place.
2 Replace the PC Workstation’s cover (refer to page 4). Reconnect all the
power and telecommunications cables.
Chapter2.fm Page 5 Wednesday, December 8, 1999 6:13 PM
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 40 41

Comentarios a estos manuales

Sin comentarios