HP EN Series Guía de usuario Pagina 129

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 278
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 128
EN
Cleaning the printer
127
Cleaning the printer media path
If you are experiencing toner specks or dots on the printouts,
clean the printer media path. This process uses a transparency
to remove dust and toner from the media path. Do not use bond
or rough paper.
1
Load a transparency in the priority input tray.
2
Make sure that the printer is in the Ready state.
3
Press and hold the
Go
button for 10 seconds. The
transparency feeds slowly through the printer. Discard the
transparency.
Note
After holding the
Go
button for 10 seconds, each of the three printer
lights blink until the cleaning process is complete.
Note
If transparency film is unavailable, you can use paper, but you should
perform the procedure 2 or 3 times to ensure proper cleaning.
Vista de pagina 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 277 278

Comentarios a estos manuales

Sin comentarios