HP Notebook Projection Companion Manual de usuario descargar pdf (Pagina 13)

Operating procedure

1. Connect the Projector and PC via USB cable.

2. Double-click [DLP Composer (TM) Lite]. The following screen will appear.

3. Select [Edit]/[Preferences]/[Communications] to check USB in [Projector Interface].

4. Click [USB Device Identification].

5. Set the items on the [Vendor 0x451, Product 0x2000].

6. Click [OK]

7. Move the cursor to [Flash Loader] on the Project window of [DLP Composer Lite]. (The

[Flash Loader] screen will appear.)

8. Click [Browse] and select where the firmware [xxxxxxxxx.img] is for download.

9. Make sure [Skip Boot Loader Area] is with a check.

10. Press Menu and Power buttons cons tantly within ten seconds after insert the USB Burning

Cable and power Cord. TEMP LED will become Red. That indicates the p rojector is in the

download mode. At this moment, you can release these two buttons.

11. Click [Reset Bus] firstly to check if USB connects well.

12. Click [Start Download]. When the dialog box is di splayed, click [Yes].

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Sin comentarios

HP Notebook Projection Companion Manual de usuario Pagina 13