
44 C
HAPTER
3: Q
UICK
S
ETUP FOR THE
F
IREWALL
UsinganIPAddress
provided by a PPPoE
Server
Select the Provided you with two or more IP addresses option and click
the Next button. The Firewall’s ISP Settings (PPPoE) screen will be
displayed as shown in Figure 15 below.
Figure 15
Configuring the Firewall’s PPPoE settings
Enter the User Name and Password as supplied by your ISP and click the
Next button to proceed to the final part of the configuration. See
“Configuring LAN Settings” on page 44.
Using a Static IP
address provided by a
DHCP Server
Select the Automatically assigns you a dynamic IP address (DHCP) option
and click the Next button. If a DHCP server is detected the Firewall will
obtain its IP address automatically and will enable NAT for all devices
connected to the LAN port. Click the Next button again to confirm your
choice and proceed to the final part of the configuration. See
“Configuring LAN Settings” below.
Configuring LAN
Settings
Once the WAN setting of the Firewall have been configured, the
Installation Wizard configures the Firewall’s LAN settings. Some of the
following processes are optional and screens will only appear if they are
relevant to the configuration of your Firewall.
Automatic LAN
Settings
The Installation Wizard checks for the presence of a DHCP server on the
LAN port.
DUA1611-0AAA02.book Page 44 Thursday, August 2, 2001 4:01 PM
Comentarios a estos manuales