HP BL495c Manual de usuario

HP ProLiant BL495c G6 Server Blade Maintenance and Service Guide Part Number 575059-002 July 2009 (Second Edition)

Customer self repair 10 periode, gewoonlijk vijf (5) werkdagen, retourneren aan HP. Het defecte onderdeel moet met de bijbehorende documentatie word

Customer self repair 11 Serviço de garantia apenas para peças A garantia limitada da HP pode incluir um serviço de garantia apenas para peças. Segun

Customer self repair 12

Customer self repair 13

Customer self repair 14

Customer self repair 15

Illustrated parts catalog 16 Illustrated parts catalog Server blade components Item Description Spare part number Customer self repair (on pag

Illustrated parts catalog 17 Item Description Spare part number Customer self repair (on page 5) a) 64-GB, 2.5-in SATA 461333-001 Mandatory1 b)

Illustrated parts catalog 18 Item Description Spare part number Customer self repair (on page 5) a) Hard drive power cable — — b) Hard drive da

Illustrated parts catalog 19 2Optional: Optional—Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für Customer

© Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

Illustrated parts catalog 20

Removal and replacement procedures 21 Removal and replacement procedures Required tools You need the following items for some procedures: • T-15 To

Removal and replacement procedures 22 CAUTION: When performing non-hot-plug operations, you must power down the server blade and/or the system. Ho

Removal and replacement procedures 23 Power down the server blade Before powering down the server blade for any upgrade or maintenance procedures, p

Removal and replacement procedures 24 3. Remove the server blade. 4. Place the server blade on a flat, level work surface. WARNING: To reduce

Removal and replacement procedures 25 5. Disconnect the hard drive cables. 6. Remove the hard drive. 7. Disconnect the hard drive cables from th

Removal and replacement procedures 26 4. Disconnect the hard drive cables. 5. Remove the hard drive ("Hard drive" on page 24). 6. Remov

Removal and replacement procedures 27 For this procedure, removing the hard drive from the DIMM baffle is not required. 6. Remove the DIMM. To rep

Removal and replacement procedures 28 To replace the component: 1. Install the mezzanine card. Press down above the back side of the connector to s

Removal and replacement procedures 29 To replace the component, reverse the removal procedure. Server blade release lever To remove the component:

Contents 3 Contents Customer self repair...

Removal and replacement procedures 30 6. Remove the release button. To replace the component, reverse the removal procedure. Heatsink WARNING:

Removal and replacement procedures 31 To replace the component: 1. Clean the old thermal grease from the processor with the alcohol swab. Allow the

Removal and replacement procedures 32 4. Install the heatsink. Insert both screws, and then alternate tightening until the heatsink is seated proper

Removal and replacement procedures 33 5. Open the processor retaining latch and the processor socket retaining bracket. 6. Using your fingers, rem

Removal and replacement procedures 34 1. If the processor has separated from the installation tool, carefully re-insert the processor in the tool.

Removal and replacement procedures 35 3. Press down firmly until the processor installation tool clicks and separates from the processor, and then r

Removal and replacement procedures 36 CAUTION: To avoid damage to the system board, processor socket, and screws, do not overtighten the heat

Removal and replacement procedures 37 2. Remove the server blade (on page 23). 3. Remove the access panel ("Access panel" on page 24). 4.

Removal and replacement procedures 38 11. Open the processor retaining latch and the processor socket retaining bracket. 12. Using your fingers, r

Removal and replacement procedures 39 13. Remove the system board assembly. To replace the system board: 1. Install the spare system board assembl

Contents 4 USB support...

Removal and replacement procedures 40 a. Remove the processor socket protective cover. b. Open the processor retaining latch and the processor soc

Removal and replacement procedures 41 5. Close the processor retaining latch and the processor socket retaining bracket. 6. Clean the old ther

Removal and replacement procedures 42 8. Install the heatsink ("Heatsink" on page 30). 9. Install all components removed from the fai

Removal and replacement procedures 43 WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline b

Cabling 44 Cabling Hard drive cabling CAUTION: When routing cables, always be sure that the cables are not in a position where they can be pinche

Cabling 45 Numerous configurations are possible. This section offers two possible configurations. For more information, see "USB support and fun

Cabling 46 1. Connect the SUV cable to the server blade. 2. Connect the video connector to a monitor. 3. Connect a USB hub to one USB connector. 4.

Diagnostic tools 47 Diagnostic tools Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving commo

Diagnostic tools 48 This functionality supports operating systems that may not be supported by the server blade. For operating systems supported by

Diagnostic tools 49 HP Insight Remote Support software HP Insight Remote Support software delivers secure remote support for your HP Servers and Sto

Customer self repair 5 Customer self repair HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow fo

Diagnostic tools 50 • Displaying system information • Selecting the primary boot controller • Configuring memory options • Language selection Fo

Component identification 51 Component identification Front panel components Item Description 1 Local I/O connector 2 Serial label pull tab 3

Component identification 52 Front panel LEDs Item Description Status 1 UID LED Blue = Identified Blue flashing = Active remote management Off =

Component identification 53 System board components Item Description 1 DIMM slots 2 Hard drive data connector 2 3 Hard drive data connector

Component identification 54 System maintenance switch Position Function Default 1* iLO 2 security override Off 2 Configuration lock Off 3 Reser

Component identification 55 Accessing the redundant ROM If the system ROM is corrupted, the system automatically switches to the redundant ROM in mo

Specifications 56 Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) Shippin

Acronyms and abbreviations 57 Acronyms and abbreviations CSR Customer Self Repair HP SIM HP Systems Insight Manager iLO 2 Integrated Lights-Out 2

Index 58 A access panel 16, 24 Array Diagnostic Utility (ADU) 48 B baffles 25 battery 16, 42 battery tray 16, 36 buttons 51 C cables 16

Index 59 R release button 29 removing the server blade 23 required tools 21 resources 47 resources, troubleshooting 47 S safety considerati

Customer self repair 6 • Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à HP de remplacer ces p

Customer self repair 7 NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la garanzia, HP richi

Customer self repair 8 anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-Ersatzteil geliefert wer

Customer self repair 9 Centro de asistencia técnica de HP y recibirá ayuda telefónica por parte de un técnico. Con el envío de materiales para la su