HP D2220sb Manual de usuario

HP D2220sb Storage Blade User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage system

Operations 10 o Partnered with a full-height server blade 5. Place the D2220sb on a flat, level work surface. Remove the access panel WARNING:

Operations 11 CAUTION: Do not operate the D2220sb with the access panel open or removed. Operating the D2220sb in this manner results in improper

Setup 12 Setup Kit contents When unpacking the HP D2220sb Storage Blade, locate the following items: • HP D2220sb Storage Blade • Half-height bla

Setup 13 • Install drives in the D2220sb before installing the D2220sb in the enclosure. • Be sure that the partner server blade is powered down b

Setup 14 device bays are populated with either a component or a blank. CAUTION: Thermal regulation is maintained only when the drive drawer is

Setup 15 o To install the D2220sb with a full-height server blade, install the half-height blade shelf. If installing two D2220sb storage blades wi

Setup 16 o Partnered with a half-height server blade o Partnered with a full-height server blade

Setup 17 o Partnered with a full-height server blade and an additional D2220sb 6. Install a server blade. See the documentation that ships with th

Setup 18 CAUTION: Thermal regulation is maintained only when the drive drawer is closed. The drive drawer open alarm is triggered under the follow

Setup 19 3. Install the drives ("Installing a drive" on page 17). 4. Close the drive drawer. 5. Install the D2220sb in the enclosure. 6

© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

Software and configuration utilities 20 Software and configuration utilities Server mode The software and configuration utilities presented in this

Software and configuration utilities 21 HP iLO enables and manages the Active Health System (on page 21) and also features Agentless Management. All

Software and configuration utilities 22 The data that is collected is managed according to the HP Data Privacy policy. For more information see the

Software and configuration utilities 23 HP Insight Diagnostics HP Insight Diagnostics is a proactive server blade management tool, available in both

Software and configuration utilities 24 HP Insight Remote Support software HP strongly recommends that you install HP Insight Remote Support softwar

Software and configuration utilities 25 SPP has several key features for updating HP ProLiant servers. Using HP SUM as the deployment tool, SPP can

Software and configuration utilities 26 For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the H

Software and configuration utilities 27 Boot options Near the end of the boot process, the boot options screen is displayed. This screen is visible

Software and configuration utilities 28 Utilities and features Array Configuration Utility ACU is a utility with the following features: • Runs as

Software and configuration utilities 29 Option ROM Configuration for Arrays Before installing an operating system, you can use the ORCA utility to c

Contents 3 Contents Component identification ...

Software and configuration utilities 30 Legacy USB support provides USB functionality in environments where USB support is not available normally. S

Software and configuration utilities 31 Software and firmware Software and firmware should be updated before using the server for the first time, un

Troubleshooting 32 Troubleshooting If the storage blade does not power up If the D2220sb does not start: 1. Be sure that the D2220sb is installed a

Troubleshooting 33 Answer Possible reasons Possible solutions LED ("Front panel LEDs" on page 6) indicates normal temperature. The dri

Troubleshooting 34 If more drives fail than the fault-tolerance method can manage, fault tolerance is compromised, and the logical drive fails. If t

Troubleshooting 35 These cases are the exceptions: o In RAID 6 configurations, any two drives in the array can be replaced simultaneously. o In RA

Troubleshooting 36 Failure of another drive during rebuild If a non-correctable read error occurs on another physical drive in the array during the

Regulatory information 37 Regulatory information Safety and regulatory compliance For safety, environmental, and regulatory information, see Safety

Electrostatic discharge 38 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions yo

Specifications 39 Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) M

Contents 4 Redundant ROM support ... 30

Support and other resources 40 Support and other resources Before you contact HP Be sure to have the following information available before you call

Support and other resources 41 providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will ship

Support and other resources 42 Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus d'in

Support and other resources 43 HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen,

Support and other resources 44 sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes

Support and other resources 45 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pel

Support and other resources 46

Support and other resources 47

Acronyms and abbreviations 48 Acronyms and abbreviations ACU Array Configuration Utility ADU Array Diagnostics Utility CSR Customer Self Repair E

Documentation feedback 49 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentat

Component identification 5 Component identification Front panel components Item Description 1 Product information tag 2 Hot-plug drive drawer r

Index 50 A access panel 10 Active Health System 20, 21 ACU (Array Configuration Utility) 20, 28 additional guidelines for installation with a

Index 51 Is the storage blade operating properly? 32 L LED, health 6 LED, internal health 6 LEDs, hard drive 7 M memory, Advanced ECC 27 m

Component identification 6 Front panel LEDs Item Description Status 1 UID LED Blue = Identified Off = Not identified 2 Drawer open LED Off =

Component identification 7 Drive drawer open alarm Slow beep (every 5 seconds)—The drive drawer is open, and drives are not fully protected by syste

Operations 8 Operations Important Safety Information Before installing this product, read the Important Safety Information document provided. Po

Operations 9 To remove the component: 1. Identify the proper D2220sb. 2. Power down the partner server blade. 3. If the partner server blade is a