HP DL380z Guía de usuario descargar pdf (Pagina 25)

Extending the server from the rack

1. Pull down the quick release levers on each side of the server.

2. Extend the server from the rack.

WARNING! To reduce the risk of personal injury or equipment damage, be sure that the rack is

adequately stabilized before extending a component from the rack.

3. After performing the installation or maintenance procedure, slide the server back into the rack, and

then press the server firmly into the rack to secure it in place.

WARNING! To reduce the risk of personal injury, be careful when pressing the server rail-release

latches and sliding the server into the rack. The sliding rails could pinch your fingers.

Removing the server from the rack

To remove the server from an HP, Compaq branded, telco, or third-party rack:

1. Power down the server (see

Powering down the server on page 16).

2. Extend the server from the rack (see

Extending the server from the rack on page 17).

3. Disconnect the cabling and remove the server from the rack. For more information, see the

documentation that ships with the rack mounting option.

4. Place the server on a sturdy, level surface.

Extending the server from the rack 17

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 132 133

Sin comentarios

HP DL380z Guía de usuario Pagina 25