HP ProLiant BL460c Guía de usuario descargar pdf (Pagina 17)

Operations 17

Remove the internal USB drive, if installed. To locate the internal USB connector, see "System board

components (on page 9)."

7. Remove all DIMM baffles ("Remove the DIMM baffle" on page 14).

8. Remove the storage controller (on page 15).

CAUTION: Always remove the SAS controller before removing the front panel/drive cage

assembly.

9. Extend the serial label pull tab from the front of the server blade.

10. Remove the two T-15 screws from the front panel/drive cage assembly.

11. Remove the front panel/drive cage assembly.

Remove the mezzanine assembly

1. Power down the server blade (on page 12).

2. Remove the server blade (on page 13).

3. Place the server blade on a flat, level work surface.

4. Remove the access panel (on page 14).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Sin comentarios

HP ProLiant BL460c Guía de usuario Pagina 17