HP Z Virtual Workstation series Manual de usuario descargar pdf (Pagina 9)

Front panel LEDs and buttons

Item Description Status

1 Power On/Standby button and system

power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on

sequence

Solid amber = System in standby

Off = No power present*

2 Health LED Solid green = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault**

3 NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

4 UID button/LED Solid blue = Activated

Flashing blue (1 Hz/cycle per sec) = Remote management or

firmware upgrade in progress

Off = Deactivated

*Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred,

or the power button cable is disconnected.

**To identify components in a degraded or critical state, see the Systems Insight Display LEDs, check iLO/BIOS logs, and

reference the server troubleshooting guide.

Front panel LEDs and buttons 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 110 111

Sin comentarios

HP Z Virtual Workstation series Manual de usuario Pagina 9