HP 8/20q Manual de usuario descargar pdf (Pagina 22)

A TR_Port is used as a bridge between the transparent router’s local fabric and a remote fabric. A TR_Port

uses standard NPIV login methods to attach to the remote fabric. For remote HP B-series or C-series fabrics,

the switch to which the TR_Port connects must support NPIV; and for B-series fabrics, the interoperability

mode must be configured to InteropMode=0. The TR_Port logs into the remote fabric using the TR_Port

WWN. The TR_Port accesses fabric services of the remote fabric, such as Name Server and Management

Server, and may receive registered state change notifications (RSCNs). The TR_Port uses FDISCs to login

proxies for devices attached to an N_Port on the 8/20q Fibre Channel Switch. Any of the 8/20q Fibre

Channel Switch ports may be configured as a TR_Port.

IMPORTANT: Because C-series switches do not support the unzoned name server, C-series fabrics must be

pre-zoned before you can map TR_Ports to a remote C-series fabric using the TR Mapping Manager dialog

box. Modify the C-series fabric zone set so that the WWNs of the remote devices to be mapped and the

WWNs of the 8/20q Fibre Channel Switch TR_Ports are zoned together. It is good practice to retain these

zones in the zone set after mapping the TR_Ports until you no longer need to map the device to the local

fabric. For more information about zoning C-series fabrics, see the C-series switch documentation.

TR Mapping Manager dialog

The TR Mapping Manager dialog (Figure 7) displays the currently mapped inter-fabric routes. You can

create new inter-fabric routes, view detail information on existing inter-fabric routes, and remove existing

inter-fabric routes. To open the TR Mapping Manager dialog, select Fabric > TR Mapping Manager.

NOTE: The Merge Auto Save option in the Config Zoning dialog must be selected before you can open

the TR Mapping Manager dialog. See ”Merge Auto Save” (page 40) for more information.

To create a new TR mapping, click Add or select Edit > Add to open the Add TR Mapping dialog. See

”Add TR Mapping dialog” (page 23) for more information.

Select a TR mapping member in the TR Mapping List window to:

• Delete that TR mapping member

• View detailed information for that TR mapping member in the Selected TR Mapping area

Figure 7 TR Mapping Manager dialog

After you click OK in the TR Mapping Manager dialog, the IFZs are created and saved to the switch. If

there is an active zone set with TR mappings, the old IFZs are deleted and replaced with the new IFZs, and

then the active zone set is re-activated. If there is no active zone set, a zone set named TR_MAPPING_SET”

(default name) is created, the new IFZs are added to the zone set, and then the zone set is activated. If

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 107 108

Sin comentarios

HP 8/20q Manual de usuario Pagina 22