
7
If you select Specify access parameters, specify the access parameters,
including Web Username, Web Password, Web Port, Telnet Username,
Telnet Password, SNMP Version, Community String for Reading, and
Community String for Writing.
Web Username
Required
Specify the username for managing the device through web.
The username can comprise up to 20 characters.
Web Password
Required
Specify the password for managing the device through web.
The strength of the password must meet the password strength
requirements of the device.
Web Port
Optional
Specify the port of the device to be connected with the network.
The port number must be an integer in the range from 0 to 65535.
Telnet Username
Optional
Specify the username for telneting to the device.
The username can comprise up to 20 characters.
Telnet Password
Optional
Specify the password for telneting to the device.
IMPORTANT:
The strength of the password must meet the password strength requirements
of the device.
SNMP Version
Required
Select an SNMP version, which can be SNMPv1, SNMPv2, or SNMPv3.
Community String for Reading
Required
Specify the SNMP read community string to be used for communication
with the device.
The string can comprise up to 20 characters.
Community String for Writing
Required
Specify the SNMP write community string to be used for communication
with the device.
The string can comprise up to 20 characters.
Authentication Username
Required for SNMPv3
Specify the authentication username to be used for communication with
the device.
Authentication Protocol
Required for SNMPv3
Specify the authentication protocol to be used for communication with the
device.
Comentarios a estos manuales