HP High Performance LC Cluster series Manual de instalación descargar pdf (Pagina 7)

Step Q7 Configure the ProCurve Switch

Select an IP address from the same IP subnet that will be used for the

Compute Nodes.

Connect a console to the switch

Log onto the switch through the console

Type 'set-up'

Select IP Config and select the "manual" option

Select the IP address field and enter the IP address to be used for the

switch

For more information, see the Comprehensive Instructions for this step.

References:

Step 7 Configure the ProCurve Switch

Step Q8 Copy the License Files to the Management Server

Put the files in any convenient directory on the Management Server (e.g. /tmp).

For more information, see the Comprehensive Instructions for this step.

References:

Step 8 Copy the License Files to the Management Server

Step Q9 Install ClusterPack on the Management Server

Mount and register the ClusterPack DVD as a software depot.

Install the ClusterPack Manager software (CPACK-MGR) using

swinstall.

Leave the DVD in the DVD drive for the next step.

For more information, see the Comprehensive Instructions for this step.

1 2 3 4 5 6 7 8 9 10 11 12 ... 172 173

Sin comentarios

HP High Performance LC Cluster series Manual de instalación Pagina 7