Hp Hub & Switch Management for OV-UX Manual de usuario descargar pdf (Pagina 50)

7-4

Managing Switches

Switch Status

Managing Switches

Status - Port Counters

The Port Counters information for switches displays specific network

conditions or traffic. See the online help for more information about each

counter.

Status - Port Status

The Port Status page (switches only) displays the operational status of each

switch port. The settings can be changed in the Configuration - Port

Configuration page.

The Port Status settings are described in the following table.

Table 7-1. Port Status Settings

Setting Description

Port The port number.

Port Type The network type of each switch port, for example, 100TX.

Enabled Whether the port is enabled or disabled.

Link Status The port’s current operational status. Up means the port is working

correctly. Down means the port is disabled.

Current Mode The operational mode of the port.

• 10/100 Base TX - Can be 10 Mbits half or full duplex or 100 Mbits

half or full duplex.

• 100 Base FX - Can be 100/full duplex or 100/half duplex.

• Gigabit - Can only be 1000 full duplex.

Flow Control Indicates the current state of flow control for this port.

• 10/100TX, 10 FL, 100 FX:

– On - Flow control is enabled.

– Off - Flow control is disabled (default).

• Gigabit:

– On (TX, RX) - Flow control is enabled on transmit and

receive.

– On (RX) - Flow control on receive only.

– Off (default) - Flow control is disabled.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 103 104

Sin comentarios

Hp Hub & Switch Management for OV-UX Manual de usuario Pagina 50