Hp OneView for Red Hat Enterprise Virtualization Manual de usuario descargar pdf (Pagina 33)

9 Viewing traps in RHEV-M

HP OneView for RHEV can populate the RHEV-M event database with information from SNMP

traps generated by HP hardware. The benefit of populating the traps in the RHEV-M database is

to facilitate notification and identification of hardware error conditions or failures.

To view these traps, click the Events tab in the RHEV-M console.

Events populated by HP OneView for RHEV include:

• iLO traps (e.g. for power failure, iLO reset, health degradation)

• Onboard Administrator traps

• Virtual Connect module traps

NOTE: For traps to be populated in the RHEV-M database, each entity must first be configured

with RHEV-M as a destination. To configure each entity trap:

• iLO traps

◦ Access the iLO Administration>Management>SNMP settings.

◦ Select Agentless Management or SNMP Pass-thru depending on the iLO version, and

then select the Add RHEV-M as SNMP trap destination.

• Onboard Administrator traps

◦ Access the Onboard Administrator>Enclosure Information>Enclosure settings, and then

select SNMP settings.

◦ Click the New button, and then select the Add RHEV-M as SNMPtrap destination.

NOTE: The default SNMP Community String is “public.”

Virtual Connect module traps

◦ If a Virtual Connect module is managed by HP OneView, access HP OneView

appliance>Settings>Edit Appliance, and then select Add RHEV-M as SNMP trap destination.

NOTE: The entity must be discovered in RHEV-M to receive traps from that entity.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 44 45

Sin comentarios

Hp OneView for Red Hat Enterprise Virtualization Manual de usuario Pagina 33