HP PROCURVE 6120 Manual de usuario descargar pdf (Pagina 135)

100

101

6-27

Switch Memory and Configuration

Multiple Configuration Files

2. Use the CLI to make configuration changes in the running-config file, and

then execute write mem.

The result is that the startup-config file used to reboot the switch is modified

by the actions in step 2.

Figure 6-18. Example of Reboot Process and Making Changes to the Startup-

Config File

Creating an Alternate Startup-Config File. There are two methods for

creating a new configuration file:

■ Copy an existing startup-config file to a new filename, then reboot the

switch, make the desired changes to the running-config file, then execute

write memory. (Refer to figure 6-6-18, above.)

■ Erase the active startup-config file. This generates a new, default startup-

config file that always results when the switch automatically reboots after

deletion of the currently active startup-config file. (Refer to “Erasing a

Startup-Config File” on page 6-35.)

Transitioning to Multiple Configuration Files

At the first reboot with a software release supporting multiple configuration,

the switch:

■ Assigns the filename oldConfig to the existing startup-config file (which is

stored in memory slot 1).

Boot Command

Primary Boot Path

Active Startup-Config File:

backupConfig

Use CLI To Change Running-Config

Generated Running-Config File

Execute write mem To Save Changes to

Source Startup-Config File

Idle Startup-Config File:

workingConfig

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 588 589

Comentarios a estos manuales

Sin comentarios

HP PROCURVE 6120 Manual de usuario Pagina 135

Comentarios a estos manuales

Relacionado con productos y manuales para Software HP PROCURVE 6120