HP X9300 Guía de instalación descargar pdf (Pagina 15)

4. The Verify Configuration dialog box shows the configuration for the server. Select Commit to

continue.

5. On the Form a Cluster — Step 2 dialog box, enter the cluster name and specify the IP address

and netmask for the Management Console IP (also called the Cluster Management IP). Also

enter the IP addresses and domain for your DNS servers, and the IP addresses for your NTP

servers.

6. The Network Configuration dialog box lists the Ethernet devices included in bond0. The bond0

configuration is complete; select Continue and go to the next step.

NOTE: If required, the configuration of bond0 can be modified at this step by selecting

bond0 in the list of devices and then selecting Configure. This should be necessary only if you

have a non-standard configuration and the slave devices chosen by the installer for bond0

are not correct for your environment.

Completing the installation in text mode — unified network 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 150 151

Sin comentarios

HP X9300 Guía de instalación Pagina 15