HP PCIe Workload Accelerators for ProLiant Servers Manual de instalación

HP PCIe Workload Accelerator HHHL SSDInstallation GuideHP PCIe Workload Accelerator Half-Height,Half-Length NAND Flash SSDAbstracthis document describ

Figure 4 Inserting the HP PCIe Workload Accelerator Drive into an Available PCIe SlotFigure 5 PCIe Workload Accelerator Drive Installed7. Power up the

4 Installing the HP PCIe Workload Accelerator SoftwarePrerequisitesReview the following requirements before installing the HP PCIe Workload Accelerato

a. Before installing HPWAM, install JRE 1.6 or later (64-bit version). For JREinstallationinstructions and downloads, go to www.java.comb. If you have

a. As a root user, run rpm -Uvh <rpm-name> where <rpm-name> ismtip32xx-<version>.x86_64_rhel5ux.rpm.b. As a root user, run depmod.c.

a. As a root user, run rpm -Uvh <rpm-name> where <rpm-name> ismtip32xx-kmp-default-<version>.<kernel_version>.x86_64.rpm.b. As

5 Verifying the InstallationTo verify that the installation was successful:1. In the operating system, verify that the drive appears as a recognized d

6 TroubleshootingReview the following troubleshooting steps if problems are encountered when following theinstallation instructions in this document.P

a. Run rssdm -S.b. Check SMART attribute 194 (enclosure temperature) and compare value to the tempthrottle threshold in C.c. If the enclosure temperat

5. Power the system on.6. Run the rssdm –L command to verify the SSD temperature. If the temperature remains belowthe thermal threshold limit, the SSD

7 LED CodesTable 2 LED CodesDescriptionHHHLRed LEDAmber LEDGreen LEDIndicates that power is off.OffOffOffIndicates that power is on and the drive is b

© Copyright 1999, 2013 Hewlett Packard Inc.Confidential computer software. Valid license from HP required for possession, use or copying. Consistent w

8 References• HP PCIe Workload Accelerator Manager User Guide• PCIe Express CEM Specification Version 2.0• Java Runtime Environment version 1.6 x64 an

*727351-001*Printed in the US

Contents1 Introduction...4HP PCIe Workload Accelerator Ove

1 IntroductionThis document describes how to install an HP PCIe Workload Accelerator half-height, half-length(HHHL) PCIe NAND Flash SSD into a host sy

Figure 1 HP PCIe Workload Accelerator HHHL card (Component side)Figure 2 HP PCIe Workload Accelerator HHHL card (Solder Side)HP PCIe Workload Accelera

A total of 64 NAND placements are on the drive. The 350GB drive has four NAND die perpackage and the 700GB drive has eight NAND die per package. NAND

• Microsoft Windows Server 2012 (x86-64) SP128• Microsoft Windows Server 2012 Hyper-V (x64)• Microsoft Windows 7 (x64)• Microsoft Windows 8 (x64)• Red

2 Components Provided by HPHardwareHP provides the number of HP PCIe Workload Accelerator drives of the appropriate capacity thathave been ordered or

3 Installing the HP PCIe Workload Accelerator HardwareTo install the HP PCIe Workload Accelerator hardware in a system:1. Power down the host system.2