Hp 3Gb SAS Switch for HP BladeSystem c-Class Manual de usuario descargar pdf (Pagina 14)

Installing the switch

NOTE:

• The 3Gb SAS Switch can be hot-installed in an operational BladeSystem c-Class enclosure.

• Make sure that the mezzanine cards are installed in server mezzanine slots that map to the selected

BladeSystem c-Class enclosure interconnect bay.

• The 3Gb SAS Switch does not have a power on/off button. Power is automatically applied or

removed when the switch is installed or removed from the BladeSystem c-Class enclosure. Altern-

atively, power can be applied or removed through the Onboard Administrator application.

• Connect SAS cables to external storage enclosures only after confirming that the desired firmware

version is installed on the switch.

For illustration purposes, the following images demonstrate installing a 3Gb SAS Switch in interconnect

bay 5 of a BladeSystem c7000 enclosure.

1. Remove the air baffle from the selected interconnect bay.

2. Prepare the switch.

Installation procedures14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Sin comentarios

Hp 3Gb SAS Switch for HP BladeSystem c-Class Manual de usuario Pagina 14