Hp 9000 Virtual Library System Manual de usuario Pagina 177

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 258
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 176
StatusDescriptionItem
To determine Power cap status, see HP Systems
Insight Display LEDs and Internal Health LED
Combinations.
Power cap LED1
Green = Network link existsNIC LEDs2
Flashing green = Network link and activity exist
Off = No link to network exists
If power is off, the front panel LED is not active. For
status, see Rear Panel LEDs and Buttons.
Green = AMP mode enabledAMP status3
Amber = Failover
Flashing amber = Invalid configuration
Off = AMP mode disabled
Amber = FailureAll other LEDs
Off = Normal.
For possible failure causes, see HP Systems Insight
Display LEDs and Internal Health LED Combinations.
NOTE: The HP Systems Insight Display LEDs represent the system board layout.
HP Systems Insight Display LEDs and Internal Health LED Combinations
When the internal health LED on the front panel illuminates either amber or red, the server is
experiencing a health event. Combinations of illuminated system LEDs and the internal health LED
indicate system status.
StatusSystem power
LED
Internal health LED
color
HP Systems
Insight Display
LED and color
One or more of the following conditions may exist:AmberRedProcessor (amber)
Processor in socket X has failed.
Processor X is required yet not installed in the socket.
VLS9200 Node Components, LEDs, and Buttons 177
Vista de pagina 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 257 258

Comentarios a estos manuales

Sin comentarios