Hp StorageWorks 3000 RAID Array Manual de usuario descargar pdf (Pagina 21)

Introduction 1-5

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: b-ch1 Introduction.doc Last Saved On: 12/4/00 12:10 PM

Local Serial Port Connection

The simplest connection to the storage subsystem is a direct cable connection

from the local system that has the storage window installed to one of the

subsystem controller’s serial maintenance ports (Figure 1-2). Because direct

serial connections are only available with a stand-alone Storage window, you

will be not be able to connect locally to a subsystem by means of the

Navigation Tree. Table 1-3 lists an overview of the steps that you need to

complete:

Table 1-3

How to Set Up SWCC for a Serial Connection

Step Procedure

Install the Client software. See Chapter 2

“ Installing and Setting Up the

Command Console Client

” .

2 Set up a serial connection. See Figure 1-2.

Create a virtual disk by using a serial connection. See Chapter 2

“ Installing and

Setting Up the Command Console Client

” .

4 For more information, see “Establishing a Serial Connection Single Controller”

and Establishing a Serial Connection, Dual Controller” in Chapter 2.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 125 126

Sin comentarios

Hp StorageWorks 3000 RAID Array Manual de usuario Pagina 21