Hp A3312A Manual de usuario descargar pdf (Pagina 105)

Service

Backplane Assembly

Service

Rackmount Backplane Assembly

CAUTION! The following procedures require that you turn off the storage enclosure and

make it inaccessible. Check with the system administrator before proceeding.

To replace the rackmount backplane assembly (Figure 46):

1. Disconnect the AC Power cords and SCSI interface cables.

2. Remove all modules from the bays.

3. Remove eight standoffs (23) from four SCSI connectors with a flat-bladed screwdriver.

4. Remove eleven M4/T15 screws (14).

5. Remove the backplane assembly (24).

6. Reassemble the backplane assembly in reverse order, ensuring that it is seated properly. Align the

power switch push rod (19) with the power switch on the backplane assembly and check for proper

operation.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 148 149

Sin comentarios

Hp A3312A Manual de usuario Pagina 105