HP DC5100 Manual de usuario descargar pdf (Pagina 19)

Hardware Reference Guide www.hp.com 2-9

Hardware Upgrades

5. Open both latches of the memory module socket 1, then insert

the memory module into the socket 2.

Installing a DIMM

✎

A memory module can be installed in only one way. Match the notch

on the module with the tab on the memory socket.

✎

For maximum performance, populate the sockets so that the memory

capacity of Channel A is equal to the memory capacity of Channel B.

For example, if you have one preinstalled DIMM in socket XMM1

and are adding a second DIMM, it is recommended that you install a

DIMM of equal memory capacity into the XMM3 or XMM4 socket.

6. Push the module down into the socket, ensuring that the module

is fully inserted and properly seated. Make sure the latches are in

the closed position 3.

7. Repeat steps 5 and 6 for any additional modules that you want to

install.

8. Replace the computer cover.

The computer automatically recognizes the additional memory the

next time you power on the computer.

376293-002.book Page 9 Friday, February 18, 2005 3:02 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Sin comentarios

HP DC5100 Manual de usuario Pagina 19