HP Advanced Communications Controllers (ACC) Guía de usuario Pagina 209

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 328
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 208
ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4 209
data.setport.qlimit
New port limit (in bytes). This field is for action ZcDSC_SET_XMIT_LIMIT
only.
Response Data
T1/ESF PRMs transmitted as “carrier”. The
performance report messages transmitted in T1/ESF
mode contain an address which indicates whether
the ACC is a “network” or “user” device. By default
the ACC is a “user” device.
NP 1 =
On
T1/ESF performance report messages suppressed
This option suppresses the transmission of
performance report messages in T1/ESF mode.
LH 1 =
On
Long-haul mode (Z7330B only)
Enables the receive equalization and high power
transmit line.
CF 1 =
On
Reduced corner frequency (Z7330B only)
The corner frequency at which jitter
attenuation begins, is reduced by a factor of ten by
setting this option.
JP 1 =
On
JT G.706 mode (Z7330B only)
In T1/ESF mode the CRC6 is calculated and
the remote alarm processed according to JT G.706
(Japanese variation) by setting this option.
Vista de pagina 208
1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 327 328

Comentarios a estos manuales

Sin comentarios