HP OmniBook 2000/5700 Manual de usuario descargar pdf (Pagina 24)

Starting Out with Your OmniBook

A tour of the OmniBook

1-16

To reset and restart the OmniBook

If your OmniBook stops responding—and you can’t correct the problem in

Windows—you can reset the OmniBook and restart Windows.

1. If possible, shut down Windows.

2. Press Ctrl+Alt+Del to reboot the OmniBook.

–or–

Press the square Off button on the left side of the case for 2 seconds, then press

the blue On/Suspend button.

–or–

Insert a straightened paper clip into the small hole below the ac adapter socket

and press the Reset button inside the hole.

Hint

If you want to reboot from a boot disk in the floppy disk drive, put the disk in the

floppy disk drive before you restart the OmniBook. For example, you can reboot

from the Support Utility disk, then use the commands on this disk to check your hard

disk.

Reset button

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 99 100

Sin comentarios

HP OmniBook 2000/5700 Manual de usuario Pagina 24