HP OMNIBOOK 800 Manual de usuario descargar pdf (Pagina 11)

Starting Out with Your OmniBook

Setting Up the OmniBook

1-5

To set up the OmniBook

See “Battery Safety” in chapter 6 for the proper handling of batteries.

1. Install the battery.

• Lay the battery pack into the battery compartment. The metal battery

contacts on the pack mate with contacts in the compartment.

• Close the two latches.

The battery pack contains rechargeable batteries. The first time you use your

OmniBook, you should charge the battery for 1 or 2 hours before operating

solely on battery power. However, you can operate immediately with the ac

adapter plugged in—see the next section.

2. Connect the ac adapter and start charging.

• Plug the power cord into the ac adapter, then into a grounded ac outlet.

• Plug the connector from the ac adapter into the socket at the right-rear

corner of the OmniBook.

• Important: If you will not be using the ac adapter for an extended period of

time, unplug it from the power source.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 87 88

Sin comentarios

HP OMNIBOOK 800 Manual de usuario Pagina 11