HP OMNIBOOK 800 Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Changing the Configuration
Using the System Configuration Utility
4-8
Using the System Configuration Utility
The System Configuration Utility (SCU) provides access to basic configuration
settings. It is independent of the operating system.
To run the SCU
1. Close all applications, then shut down Windows and reboot the OmniBook. If
necessary, you can press CTRL+ALT+DEL to reboot.
2. During reboot, at the message <F2> to enter System Configuration Utility,
press F2 to start the SCU.
3. The mouse is not active in the SCU. Press ALT to activate menus, and use arrow
keys, spacebar, ENTER, and ESC to navigate and change settings. See the tables
below for more information.
4. After you select the options you want, use the Exit menu to close the SCU.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 87 88

Comentarios a estos manuales

Sin comentarios