HP ProDesk 400 G3 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 28)

Expansion card

Description

Printer port, PCI card

GeForce GT 730 graphics card, 2 GB, DDR3, PCIe x8

Nvidia NVS 310 graphics card, 512 MB, DDR3, PCIe x16

Intel 802.11 a/b/g/n (2x2) + Bluetooth 4.0 Wireless NIC

Intel Dual Band Wireless 7265NV 802.11 a/b/g/n (2x2) Wireless NIC

Intel Dual Band Wireless 7265AN 802.11 a/b/g/n (2x2) Wireless NIC

Intel Dual Band Wireless-AC 3165

WLAN module adapter, PCIe card

Intel PRO/1000 single port GbE NIC, includes bracket

The computer has one PCI Express x1 expansion socket and one PCI Express x16 expansion socket.

NOTE: The PCI Express sockets support only low prole cards.

You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket.

For dual graphics card congurations, the rst (primary) card must be installed in the PCI Express x16 socket.

To remove, replace, or add an expansion card:

1. Prepare the computer for disassembly (Preparation for disassembly on page 17).

2. Remove the access panel (Access panel on page 18).

3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot

on the back of the computer chassis.

4. Rotate the slot cover release latch to the open position.

20 Chapter 4 Removal and replacement procedures: Small Form Factor

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 130 131

Sin comentarios

HP ProDesk 400 G3 Base Model Small Form Factor PC Manual de usuario Pagina 28