HP ProDesk 400 G3 Base Model Small Form Factor PC Manual de usuario descargar pdf (Pagina 29)

5. Before installing an expansion card, remove the expansion slot cover or the existing expansion card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to

the expansion card.

a. If you are installing an expansion card in a vacant PCI Express x16 socket, remove the appropriate

expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the

inside of the chassis.

b. If you are installing an expansion card in a vacant PCI Express x1 socket, insert a atblade

screwdriver into the slots on the rear of expansion slot cover (1) and rock the slot cover back and

forth to break it free from the chassis (2).

Expansion card 21

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 130 131

Sin comentarios

HP ProDesk 400 G3 Base Model Small Form Factor PC Manual de usuario Pagina 29