HP TippingPoint Next Generation Firewall Series Guía de inicio rápido descargar pdf (Pagina 16)

4 Installation

8. Unzip the downloaded vSMS software package.

The software package expands into two files, both of which are needed to deploy the vSMS. Their

names are similar in format to the following:

vsms-4.0.vSMS.xxxx.ovf

vsms-disk1-4.0.vSMS.xxxx.vmdk

Obtain the vSMS Certification String

1. After HP TippingPoint receives your product purchase order, you receive a physical registration card

that is mailed to you soon after the order is placed.

2. Use the information on the card to contact HP TippingPoint by email to obtain your unique vSMS

certification string.

3. HP TippingPoint emails your unique vSMS certification string to you. When you receive the

certification string, you can begin deployment of the vSMS.

Deploy the vSMS Software

The vSMS is a virtual appliance compressed and packaged according to the VMware Open Virtualization

Format (OVF). The vSMS contains a ready-to-configure instance of SMS. When the vSMS is deployed the

SMS software running in the virtual appliance operates in the same manner as if it were running on a

physical SMS appliance.

CAUTION: Deployment of the vSMS .ovf file must be performed through VMware vCenter Server.

Deploying it directly through ESX/ESXi utilities is not supported.

1. Use the VMware vSphere Client to log on to the VMware vCenter Server that manages the ESX/ESXi

host where you want to deploy the vSMS.

2. Select the host where you want to deploy the vSMS.

When you deploy the vSMS be sure to deploy it onto an ESX/ESXi host that has network access to the

devices you want the vSMS appliance to manage.

3. Use the following steps to deploy the vSMS .ovf file:

a. Click File > Deploy OVF Template.

b. Locate the *.ovf file you obtained when you unzipped the vSMS software package, and then

click Next.

c. Verify the template details, and click Next.

d. Specify a name and a location for the vSMS, and then click Next.

e. Specify a host/cluster where you want to deploy the vSMS, and then click Next.

f. Select a datastore for the vSMS, and click Next.

NOTE: If the storage page of the OVF deployment wizard indicates the host where you are

installing the vSMS appliance does not provide sufficient disk space, you should deploy the vSMS

appliance to a different host that does have sufficient disk capacity. If you do not have another host

where you can deploy the vSMS appliance, select thin provisioning format in the next step.

g. Choose the format for storing the virtual disks: thin or thick provisioning format.

h. Select a Destination Network to which to map the source network in the OVF template.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Sin comentarios

HP TippingPoint Next Generation Firewall Series Guía de inicio rápido Pagina 16