HP 110 Wireless-N Router Series Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
46 CHAPTER 4: RUNNING THE SETUP WIZARD
Wizard - LAN Settings The LAN Settings screen allows you to set the default IP address and
DHCP client IP range for the Router.
Figure 32 The LAN Settings Screen
1 To change the Router’s default IP address, enter the new IP address in the
IP Address field, and then enter the subnet mask in the Subnet Mask
field.
2 Check the Enable DHCP Server box to enable the DHCP function.
3 Enter the client IP address range in the IP Pool Start Address and IP Pool
End Address fields. You can also click Auto IP Range to automatically set
the starting and ending IP address: 192.168.1.2 ~ 192.168.1.254.
4 Click Next. The Wireless Settings screen will appear (refer to Figure 33).
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 181 182

Comentarios a estos manuales

Sin comentarios