Hp Parallel Uninterruptible Power System Manual de usuario Pagina 91
- Pagina / 115
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Maintenance 91
2.
Unplug the ERM from the back of the UPS.
3. Unplug the ERM from a second connected ERM.
4. Remove the front bezel on the ERM that is being replaced.
5. Remove the screws securing the ERM to the rack.
6. Remove the ERM from the rack.
To replace the component, reverse the removal procedure.
Updating the UPS firmware
To update the UPS firmware, see the HP website (http://www.hp.com/go/rackandpower).
Verifying the HP UPS Management Module firmware version
To verify that the HP UPS Management Module is running the latest firmware version, see the HP website
(http://www.hp.com/go/rackandpower). To update the firmware, download the HP UPS Management
Upgrade Utility, and follow the attached instructions.
Configuring a USB to serial converter
NOTE: This procedure was tested on the Windows
®
XP Professional, Windows Server
®
2003,
and Windows
®
Vista Enterprise operating systems using the HP USB to serial converter (part
number 304098-001). Depending on your system configuration, a driver download might be
required to successfully install the converter. The driver can be downloaded from the USB-Drivers
website (http://www.usb-drivers.com/drivers/123/123294.htm).
To configure a USB port to the COM 1 port on systems that do not have available serial ports:
1. Connect the USB to serial converter to the USB port on your system.
2. For Windows Vista, click Start, select Control Panel, double-click System and Maintenance, and then
skip to step 4.
-or-
For Windows XP, click Start, select Control Panel, click Performance and Maintenance, and then click
System.
-or-
For Windows Server, click Start, select Control Panel, and then double-click System.
3. Click the Hardware tab.
4. Click Device Manager. The Device Manager screen appears.
5. In the tree displayed in the left panel, click the Ports (COM & LPT) branch to expand.
6. Double-click the port that is assigned to your USB to serial converter device. This port is usually named
with the device manufacturer's name followed by one of the following:
o USB to Serial Bridge (COM 4)
o USB Serial port
o Communications Port (COM1)
The Port Properties screen appears.
- HP 3 Phase UPS 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- UPS front panel 8
- UPS front panel controls 9
- UPS rear panel 10
- ERM rear panel 12
- UPS installation 13
- Selecting a site 14
- Readying the equipment 14
- UPS installation 15 15
- UPS installation 16 16
- Installing the UPS 17
- Installing the batteries 19
- UPS installation 20 20
- Connecting the REPO port 21
- • For the 12kVA models— 24
- Charging the UPS batteries 25
- • 50/60 Hz 26
- Bottom entry 27
- Wiring the terminal block 28
- UPS installation 31 31
- UPS installation 32 32
- UPS installation 34 34
- UPS installation 36 36
- UPS installation 37 37
- Item Description 42
- UPS installation 44 44
- UPS installation 46 46
- UPS installation 47 47
- UPS installation 49 49
- UPS installation 51 51
- UPS installation 52 52
- ERM installation 55
- ERM installation 57 57
- ERM installation 59 59
- Installing the ERM 60
- ERM installation 62 62
- Charging the ERM batteries 63
- UPS operations 64
- Normal mode 65
- Battery mode 66
- Auto-Bypass mode 66
- Configuring the UPS 67
- Changing user settings 68
- Silencing an audible alarm 71
- Communication 74
- Communication options 75
- Control terminals 76
- Relay output contacts 76
- Programmable signal inputs 77
- Parallel communication 77
- Mode transfers 78
- Redundant signal wiring 78
- Auto-identification 78
- Metering 79
- Power management 80
- Maintenance 81
- Replacing UPS X-Slot cards 83
- Replacing the batteries 87
- Replacing the UPS 89
- Replacing the ERM 90
- Updating the UPS firmware 91
- Click Action 93
- The Action Menu appears 93
- Troubleshooting 94
- Battery breaker 95
- Battery connection condition 96
- Battery low condition 96
- Battery test condition 96
- Bypass is unavailable 96
- Phase rotation verification 97
- Overload condition 98
- Overtemperature condition 98
- Selective trip 99
- Site wiring condition 99
- UPS does not power down 99
- UPS does not power up 99
- UPS is on battery 100
- UPS is on bypass 100
- Specifications 101
- UPS input specifications 102
- UPS output specifications 103
- Environmental specifications 103
- Battery specifications 104
- Battery runtimes 104
- REPO port specifications 105
- Ordering spares 106
- UPS spare parts list 106
- Hardware options 106
- Support and other resources 107
- Regulatory information 108
- Pre-Failure Battery Warranty 109
- Electrostatic discharge 110
- Acronyms and abbreviations 111
- Documentation feedback 112
- Index 113 113
- Index 114 114
- Index 115 115
Relacionado con productos y manuales para Accesorios De Computador Hp Parallel Uninterruptible Power System
Accesorios De Computador Hp Lecteur de carte multimédia 14 en 1 USB2.3 3.5 HP Manual de usuario
(15 paginas)
(15 paginas)
Accesorios De Computador Hp Graveur de CD interne HP CD-Writer Plus 7570i Manual de usuario
(46 paginas)
(46 paginas)
Ironman Fitness 350r manuals
Owner’s manuals and user’s guides for Fitness, gymnastics & weight training Ironman Fitness 350r.
We providing 1 pdf manuals Ironman Fitness 350r for download free by document types: User Manual
Comentarios a estos manuales