Hp Integrity NonStop H-Series Manual de usuario descargar pdf (Pagina 37)

Cabling the Fibre Channel Converter

9800FC (CT9800FC) Fibre Channel Converter Installation and User’s Guide—524957-003

3-9

Installing the SCSI Interface Cable

1. Before you install the 68-pin SCSI cable from the Fibre Channel converter to the

server, check that the tape library and the Fiber Channel converter are both

powered off. Refer to Appendix A, Multimode Fiber Optic Cables for a listing of

SCSI part numbers.

2. Connect the 68-pin SCSI cable to the SCSI channel port on the Fibre Channel

converter. See Figure 3-2, Rear Panel Components, on page 3-2.

3. Connect the other end of the 68-pin SCSI cable to a supported SCSI port on a

NonStop S-series server.

Installing Fiber Interface Cables

1. Connect one end of the fiber cable to the Fiber Channel interface card. See

Figure 3-8, Example of the Fibre Channel Converter Configuration with a L700

Tape Library and a NonStop S-series Server, on page 3-8.

2. Connect the other end of the cable to the GBIC on the Fibre Channel converter.

See Figure 3-5, Location of the GBIC on the Fibre Channel Converter, on

page 3-6.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 56 57

Sin comentarios

Hp Integrity NonStop H-Series Manual de usuario Pagina 37