Hp Integrity NonStop H-Series Manual de usuario descargar pdf (Pagina 49)

Maintaining the Tape Drive

9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure—524959-003

5-3

Maintenance Procedures

Recovering From a Stuck Tape Cartridge

When you press the Unload switch, or when the unload function is electronically

triggered, and the cartridge fails to eject, you must manually remove it.

1. Insert a flat screwdriver through the hole on the right side of the operator

panel on the tape drive.

2. Press against the spring-loaded screw inside until it stops.

3. Turn the screw clockwise until the tape cartridge releases.

Caution. In the following procedure, to avoid damage to the gears do not turn the screw driver

counter-clockwise.

Figure 5-1. Recovering From a Stuck Tape Cartridge

Place Screwdriver Here

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 85 86

Sin comentarios

Hp Integrity NonStop H-Series Manual de usuario Pagina 49