Hp Integrity NonStop H-Series Manual de usuario descargar pdf (Pagina 51)

9840 (CT9840FC-3) Installation and User’s Guide for the NonStop S-Series Enclosure—524959-003

6-1

6 Servicing the Tape Drive

This section includes:

Removing a Tape Drive From the Tape

Enclosure

1. Remove the rear cover.

2. Remove the power cord and the fiber cable from the unit.

3. Loosen the two screws on the rear of the drive. See Figure 6-2 on page 6-3 for the

location of the two rear screws.

4. When the two screws are both unscrewed all the way, take hold of the rear handle

and slowly pull the drive toward you.

5. Pull the tape drive out enough so that the top handle is visible. With one hand on

the rear handle and the other hand on the top handle, slowly pull the tape drive out

of the enclosure and set it aside.

Removing a Tape Drive From the Tape

Enclosure

6-1

Adding a Tape Drive to the Tape

Enclosure

6-2

Note. This section explains in detail how the user will be able to easily add a tape drive or

remove it from the tape enclosure

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 85 86

Sin comentarios

Hp Integrity NonStop H-Series Manual de usuario Pagina 51